 |
|
Features/Benefits
- Epoxy lined and prime exterior
finished carbon steel pressure vessels. Non-ASME construction with 100
psig working pressure.
- High capacity, strong-base
anion exchange resin in chloride-form.
- Galvanized steel face-piping
assembly with cast iron, normally-open, "Y" pattern diaphragm
control valves.
- Pilot stager valve controller
for automatic regeneration operation.
- Pre-wired in a NEMA-12
enclosure with an adjustable timeclock for regeneration initiation.
- Self-adjusting flow control
to maintain accurate backwash rates.
- Pressure-compensated brine
injector for correct brine flow and concentration.
- PVC media-retaining underdrain
distribution system in either hub-radial or header-lateral configurations
for minimal pressure drop and proper regeneration.
- Rigid, polyethylene brine
tanks with dry or wet-salt storage and water re-fill valves.
- Caustic feed system including
metering pump, pump stand, and automatic controls.
|
Optional Equipment
- ASME constructed, stamped,
and certified pressure vessels for varying working pressures.
- "Safety Blue"
finish painted vessel exteriors. Alternative colors are available.
- Mechanical automatic-reset
water meters for volume initiated regeneration.
- Electronic water meters
for volume initiated regeneration, flow display, and totalization.
- Twin alternating configurations
with remote water meter (mechanical or electronic) and electro-mechanical
controller for continuous soft water supply.
- ‘MX’ Electronic
programmable cycle controllers for systems up to 3 softener tanks.
- Flexible system control
for almost any configuration using timer or volume initiated regeneration.
"Additive Flow Feature" for automatically bringing additional
tanks on-line as service flow increases.
- Inlet/outlet pressure gauges
and sample valves.
- Sch 80 PVC face-piping
and thermo-plastic diaphragm valves.
- 304/316 Stainless steel
pressure vessels, face-piping, and internal distributors.
- Manual system valves for
operator-performed regeneration cycle.
- Bulk brine storage vessels
and brine pump skid systems.
- Programmable Logic Control
(PLC) electrical packages.
- Skid mounted, pre-piped,
and pre-wired systems (for single/multiple softeners).
|
|
|
|
