WATER SOFTENER SYSTEMS

MACHINE MODELS

MGT SERIES - Designed for a wide range of commercial and industrial applications. Individual tank capacity ranges from 15,000 grain to 1,200,000 grain with continuous flow rates of 1-215 GPM. Tank diameters up to 42" and service pipe connections up to 3" NPT are available. Single tank, multi-tank parallel, twin alternating, and triple alternating systems are available with a wide variety of timer and water meter controllers.

Features/Benefits

  • Fiberglass reinforced polyester (FRP) pressure vessels for 150 psi working pressure.
  • High capacity, sulfonated polystyrene cation exchange resin in sodium-form.
  • Brass, top mounted multi-port control valves with integral brine injector.
  • Self-adjusting flow control to maintain accurate backwash rates.
  • Internal distribution system for minimal pressure drop and optimal regeneration.
  • Rigid, polyethylene brine tanks with dry-salt shelf platform and water re-fill valves.
Optional Equipment
  • Attached mechanical automatic-reset water meters for volume initiated regeneration.
  • Attached electronic water meters for volume initiated regeneration, flow display, and totalization.
  • Twin alternating configurations with remote water meter (mechanical or electronic) and electro-mechanical controller for continuous soft water supply.
  • ‘MX’ Electronic programmable cycle controllers for systems up to 3 softener tanks. Flexible system control for almost any configuration using timer or volume initiated regeneration. "Additive Flow Feature" for automatically bringing additional tanks on-line as service flow increases.
  • Skid mounted, pre-piped, and pre-wired systems (for single or multiple softeners).



MAT SERIES - Designed for commercial and industrial applications demanding continuous soft water supply. All systems are twin-alternating configurations with one tank in regeneration or stand-by at all times. Individual tank capacity ranges from 15,000 grain to 450,000 grain with continuous flow rates of 1-45 GPM. Tank diameters up to 30" and service pipe connections up to 1.5" NPT are available.

Features/Benefits

  • Fiberglass reinforced polyester (FRP) pressure vessels for 150 psi working pressure.
  • High capacity, sulfonated polystyrene cation exchange resin in sodium-form.
  • Brass, top mounted twin-tank control valve with integral brine injector.
  • Built-In control valve alternator for continuous soft water supply.
  • Automatic-reset water meter for volume initiated regeneration.
  • Self-adjusting flow control to maintain accurate backwash rates.
  • Internal distribution system for minimal pressure drop and optimal regeneration.
  • Rigid, polyethylene brine tanks with dry-salt shelf platform and water re-fill valves.

Optional Equipment

  • Electronic water meter upgrade for volume initiated regeneration, flow display, and totalization.
  • Skid mounted, pre-assembled, and pre-loaded systems.

 

MR SERIES - Designed for larger commercial and industrial applications. Individual tank capacity ranges from 150,000 grain to 1,050,000 grain with continuous flow rates of 20-190 GPM. Tank diameters up to 42" and service pipe connections up to 3" NPT are available. Single tank, multi-tank parallel, twin alternating, and triple alternating systems are available with a wide variety of timer and water meter controllers.

Features/Benefits

  • Epoxy lined and prime exterior finished carbon steel pressure vessels. Non-ASME construction with 100 psig working pressure.
  • High capacity, sulfonated polystyrene cation exchange resin in sodium-form.
  • Galvanized steel face-piping assembly with cast iron, normally-open, "Y" pattern diaphragm control valves.
  • Pilot stager valve controller for automatic regeneration operation. Pre-wired in a NEMA-12 enclosure with an adjustable timeclock for regeneration initiation.
  • Self-adjusting flow control to maintain accurate backwash rates.
  • PVC pressure-compensated brine injector for correct brine flow and concentration.
  • PVC media-retaining underdrain distribution system in either hub-radial or header-lateral configurations for minimal pressure drop and proper regeneration.
  • Rigid, polyethylene brine tanks with dry-salt shelf platform and water re-fill valves.

Optional Equipment

  • ASME constructed, stamped, and certified pressure vessels for varying working pressures.
  • "Safety Blue" finish painted vessel exteriors.
  • Mechanical automatic-reset water meters for volume initiated regeneration.
  • Electronic water meters for volume initiated regeneration, flow display, and totalization.
  • Twin alternating configurations with remote water meter (mechanical or electronic) and electro-mechanical controller for continuous soft water supply.
  • ‘MX’ Electronic programmable cycle controllers for systems up to 3 softener tanks. Flexible system control for almost any configuration using timer or volume initiated regeneration. "Additive Flow Feature" for automatically bringing additional tanks on-line as service flow increases.
  • Inlet/outlet pressure gauges and sample valves.
  • Sch 80 PVC face-piping and thermo-plastic diaphragm valves.
  • Manual system valves for operator-performed regeneration cycle.
  • Programmable Logic Control (PLC) electrical packages.
  • High temperature constructed and condensate polisher designs.
  • Skid mounted, pre-piped, and pre-wired systems (for single/multiple softeners).
  • ‘SRS’ Salt Recycler System for 25% less salt consumption without loss in treated water quality. Requires additional control valves, enhanced stager controller, and modified brine tank.

 

MHC Series - Designed for large industrial applications. Individual tank capacity ranges from 1,200,000 grain to 5,400,000 grain with continuous flow rates of 100-1,150 GPM. Tank diameters from 48" to 96" and service pipe connections from 3" NPT to 8" flange are available. Single tank, multi-tank parallel, twin alternating, and triple alternating systems are available with a wide variety of timer and water meter controllers. Contact Marlo, Inc. for information on larger tank sizes and custom sized applications.

Features/Benefits

  • Epoxy lined and prime exterior finished carbon steel pressure vessels. Non-ASME construction with 100 psig working pressure.
  • High capacity, sulfonated polystyrene cation exchange resin in sodium-form.
  • Galvanized steel face-piping assembly with cast iron, normally-open, "Y" pattern diaphragm control valves. Filters with service piping 6" and larger utilize flanged carbon steel face-piping and double-acting butterfly service control valves.
  • Pilot stager valve controller for automatic regeneration operation. Pre-wired in a NEMA-12 enclosure with an adjustable timeclock for regeneration initiation.
  • Self-adjusting flow control to maintain accurate backwash rates.
  • Pressure-compensated brine injector for correct brine flow and concentration.
  • PVC media-retaining underdrain distribution system in either hub-radial or header-lateral configurations for minimal pressure drop and proper regeneration.
  • Rigid, polyethylene or FRP brine tanks with wet-salt storage and water re-fill valves.
Optional Equipment
  • ASME constructed, stamped, and certified pressure vessels for varying working pressures.
  • "Safety Blue" finish painted vessel exteriors. Alternative colors are available.
  • Mechanical automatic-reset water meters for volume initiated regeneration.
  • Electronic water meters for volume initiated regeneration, flow display, and totalization.
  • Twin alternating configurations with remote water meter (mechanical or electronic) and electro-mechanical controller for continuous soft water supply.
  • ‘MX’ Electronic programmable cycle controllers for systems up to 3 softener tanks. Flexible system control for almost any configuration using timer or volume initiated regeneration. "Additive Flow Feature" for automatically bringing additional tanks on-line as service flow increases.
  • Inlet/outlet pressure gauges and sample valves.
  • Sch 80 PVC face-piping and thermo-plastic diaphragm valves (2-3" service).
  • Sch 80 PVC face-piping and butterfly valves (3-8" service).
  • 304/316 Stainless steel pressure vessels, face-piping, and internal distributors.
  • Manual system valves for operator-performed regeneration cycle.
  • Bulk brine storage vessels and brine pump skid systems.
  • Programmable Logic Control (PLC) electrical packages.
  • Skid mounted, pre-piped, and pre-wired systems (for single/multiple softeners).
  • ‘SRS’ Salt Recycler System for 25% less salt consumption without loss in treated water quality. Requires additional control valves, enhanced stager controller, and modified brine tank.